While tiles are quite easy to clean and can quickly shine again, this is far from the case with grout lines. In fact, when exposed to moisture, they turn black and dirty and even give off unpleasant odors. Here are 4 tips for cleaning and maintaining them with simple homemade products. When exposed to moisture, grout lines can develop mold and dirt. These encrust and eventually compromise the watertightness and aesthetics of your tiles and can even cause significant damage such as water intrusion. That’s why it’s important to clean them.

4 Tips to clean tile grout and rid it of mold and dirt

Recurring mold in your home can lead to health problems. Moreover, the latter often gets stuck in the tile grout lines. To get rid of it, nothing could be easier! In fact, these 4 tips will help you clean your grout lines to find a shining tile.

  • The combination of baking soda and white vinegar to clean your tile grout lines

Baking soda and white vinegar are two household products that you will surely find in your cupboard. These products have cleaning and disinfecting properties that need no introduction. To clean your joints, mix in a spray bottle 4 tablespoons of baking soda and 7 tablespoons of white vinegar, then apply the obtained solution on the joints and leave it for 5 minutes. Then carefully scrub the dirtiest areas with a used toothbrush. Finally, rinse with lukewarm water and dry your tiles with a dry cloth.

  • Baking soda to remove mold stains from tile grout

If you don’t have white vinegar, don’t panic! Baking soda alone can do the trick. Among other things, it effectively cleans dirty or moldy grout. To do this, pour water on your tiles and then sprinkle the grout with baking soda. Leave for 1 to 2 minutes and then brush vigorously with a used toothbrush. You can also take a brush and sprinkle it with baking soda, which you can use to remove dirt from tile grout.

  • Bleach to brighten up moldy tile grout lines

Bleach is often used as a disinfectant because it contains a lot of chlorine, which is very effective for cleaning tile grout. In fact, chlorine kills bacteria and fungi. To use, simply pour bleach on the grout in question and leave for 10 to 15 minutes, then massage. Finally, rinse with lukewarm water. Also remember to wear gloves and a mask before using bleach. Never mix bleach with other acidic products and keep it out of the reach of children.

A homemade cleaning agent for clean joints

Household chemicals bought in supermarkets or other surfaces can sometimes prove ineffective in the face of such inconveniences. Why not make your own homemade detergent with simple ingredients? Quick and effective! To do this, simply mix 1.5 quart of water, 1/3 lb. of baking soda, 1/3 cup of vinegar and 1 ounce of citric acid. Pour the resulting solution into an atomizer spray and then spray your joints. Leave on for 15 minutes and scrub with an old toothbrush. Repeat the process, if necessary, then rinse with lukewarm water and dry with a cloth.

As you must have understood, dirt and mold can cause significant damage, so it is important to act. Therefore, these tips will make it easier for you to clean your tile grout.