Insulating a house sometimes requires significant financial sacrifices to ensure a certain comfort, especially in winter. This is another reason why energy renovations are supported by the state through some subsidies. However, is it impossible to heat your house if you have a limited income? Of course not! A simple trick will get you there.

Several measures can help prevent heat loss when using a heating system. You can put insulating joints on the windows, lay thick carpets or install thermal curtains. However, these measures alone are not enough to fully insulate and heat your home. As a result, many people opt for additional insulation measures, which are usually expensive. Here is a more economical trick to accomplish this.

Why insulates the radiator?

The benefits of insulating your radiator are numerous. In fact, 25% of the energy and heat emitted by the radiator is absorbed by the walls. In case of non-insulation, you will not be able to limit the heat loss. Therefore, placing insulation behind your heater will help prevent these energy losses, ensuring more heat in your interior while reducing the cost of electricity bills. Insulating your heater, therefore, allows you to maintain your desired temperature by limiting the use of additional heaters. Installing insulation on your radiator is also an ecological measure, as excessive energy consumption increases CO2 gas emissions into the air.

How to insulate a radiator to better heat your home?

To make the most of the heat emitted by the radiator, it is recommended to apply a reflective panel on the back of the device, using a protective adhesive film, also called insulating film, which allows to maintain an optimal temperature inside your home. The insulating film improves the performance of the radiator by 5 to 10%, avoiding energy losses. So, with this trick you can save your energy costs, avoiding at the same time the purchase of an additional heater.

What is the cost of insulating film?

Installing an insulating foil behind your radiator is more economical than buying a boiler. For the installation you can hire an experienced craftsman or even better, do it yourself.

A few tips for insulating your radiator:

  • Before you apply an insulating foil to your radiator, make sure it is turned off.
  • Measure the distance behind the unit before you buy the insulation film.
  • Once you have the foil, cut it according to the previously measured dimensions.
  • Carefully cut the foil and make sure there are no air bubbles before applying it.
  • Some insulations made of aluminum foil do not contain adhesive. In this case, use tape to attach it.
  • Once the foil is in place, reattach the heater before turning it back on. How to better insulate your home