Your plants will thank you if you leave a bottle on the patio before you leave. Here is why it is useful and how you can do it. If you are a plant lover and also like to travel, you have probably often faced the problem of how to moisturize your plants when you are away from home for long periods of time. Fortunately, there is a simple and inexpensive way to make a DIY sprinkler: just put a bottle on the terrace. Let’s see what it’s all about.

Create a sprinkler that leaves a bottle on the patio: how

To make your own sprinkler, you first need a plastic bottle, preferably a transparent one. Then you need to get a drill or awl, a string or a piece of absorbent fabric and a source of water. Start by cutting off the bottom of the bottle and make sure you have a flat surface. Next, poke small holes in the top of the bottle with your drill or awl. The holes should be small enough that the water drips through slowly, but not so large that the water drains too quickly.

At this point, take the string or piece of absorbent fabric and pass it through the neck of the bottle, making sure it touches the bottom. This absorbent material is useful because it serves as a ” bottom ” for your bottle and allows water to flow through the holes without overflowing the bottom of the bottle. Finally, we fill the bottle to about three quarters of its capacity with water, then we can turn it upside down and put it in the pot where the plant is, making sure that the absorbent fabric touches the bottom.

Once this is done, the water will begin to slowly drip through the holes and keep the soil constantly moist for several hours or even days, depending on the size of the bottle and the size of the pot in which the plant is located.

This technique can be used for both indoor and outdoor plants. In this case, you need to dig a small hole near the plant and put the bottle inside. Then we cover the bottle with soil to make it as discreet as possible so that its presence does not catch the eye.

DIY sprinkler: a few more tips

There are a few things to keep in mind when using this DIY sprinkler. First, make sure that the water drainage hole is above the ground so that the water does not leak. Also, if the bottle is too big or too small for the vase, it may not work properly. In this case, you need to adjust the size of the bottle or use more than one. If your plant has special water needs, you may need to find a way to adjust the water flow to its needs. So, if you leave a plastic bottle on the patio, you can make a DIY sprinkler, an easy and inexpensive way to keep your beloved plants hydrated even when you’re away from home.