Depending on the region, drinking water is more or less contaminated with limestone. It is normal that you often find unsightly stains in your plumbing. Therefore, it is not surprising that lime deposits often form in your bathroom faucet. Are you fed up with all the dirt that keeps accumulating? You have tried everything, but in vain, these unsubtle traces still haunt you? Don’t be so quick to throw in the towel, we have very reliable solutions to make your faucets shine.

Stop lime deposits: How to clean bathroom faucets?

Almost all of us have the annoying habit of putting off cleaning the bathroom. And this is a mistake, because the longer you procrastinate, the more dirt accumulates, and the encrusted stains are more difficult to remove. Especially the unpleasant lime and scale deposits that poison our lives. However, unlike other living spaces, the bathroom is more exposed to dirt., dust and germs of all kinds. It is well known that sanitary facilities attract bacteria like a magnet due to the omnipresent humidity. And they are put to the test: The sink, the bathtub, the shower or even the toilet bowl are constantly attacked by germs, lime, soap residues and mold. It is no secret: in order to maintain optimal hygiene, it is important to establish a regular and appropriate cleaning ritual. This is the only way to ensure the cleanliness and shine of your bathroom!

How to make the fittings shine with aluminum foil?

Who would have thought for a second that aluminum foil could even be used to clean the bathroom? In truth, it’s not that surprising, considering that it’s incredibly versatile. We already know that its main purpose is to preserve our food well or to prepare our delicious recipes in the oven. It is also a real ally in pickling burnt baking sheets, pots and pans. However, its place is not limited to the confines of the kitchen. Far from it. You will be surprised by its many uses: to facilitate ironing, eliminate static electricity in the washing machine, straighten hair, simplify the application of a permanent manicure, make silverware shine, sharpen scissors … and we still do far! Today, Clean the faucet effectively from scale and lime deposits without risk of scratching. Here are the steps you need to follow:

  • Take aluminum foil.
  • Cut a piece of it about 4 inches long.
  • Roll it into a ball.
  • Moisten it lightly with water.
  • Rub off the dirty parts.

And now, voila! By applying it on the faucet, but also on the other surfaces of your bathroom, lime stains will be removed for good and the shine will shine.

  • White vinegar and lemon juice: a powerful anti-scale duo

If you’re out of aluminum foil or don’t want to waste it, the following method is easy as pie. Many do not know it, but it turns out that lemon is a real weapon against lime deposits, thanks to its acidity that dissolves them deposits in no time. Wonderful, you never run out of it at home! How to use it: Take a lemon and cut it in half. Take one half and scrub all dirty areas to brighten and shine. Don’t skimp on sinks and wash basins.

Note: Lemon is also great for removing whitish stains that stick to vases and crystal glasses. Do not hesitate to add a good handful of salt to the container for better efficiency. Rub again with the lemon and you will be delighted with the result.

White vinegar, for its part, is also known for its anti-lime and anti-calc properties. All you have to do is apply it on a clean cotton cloth or tissue to gently remove all the encrusted stains. Your toilets will quickly regain a surprising shine! However, if you are looking for an even more effective green remedy to perfectly whiten your natural elements, we recommend combining these two products, lemon and vinegar. To remove the lime that accumulates on the shower wall, prepare this homemade cleaner (keep it safe!): 1/2 quart white vinegar, 1/2 quart hot water and the juice of one lemon. Spray this mixture on the calcified parts and leave the solution for about 5 minutes. Then rub this surface with a cloth or sponge. It’s magical: you’ll immediately notice that the calcium deposits will disintegrate in no time.

  • Descale with baking soda

It is impossible to talk about vinegar and lemon without mentioning another bleach and stain remover that is particularly effective against lime scale. That, of course, is baking soda. Our grandmothers’ little favorite has been back in full swing for a few years now and can be found in almost every household. And for good reason: in terms of cleaning, it is a real champion of its category! And just like vinegar, this white powder has enough power to soften lime stains and make them easier to remove. Here’s how to use it:

  • Mix 3 or 4 tablespoons of baking soda with 1 tablespoon of water.
  • Once the paste is obtained, spread it on the treated surfaces and let it dry for a few minutes.
  • Then scrub vigorously with an old brush.
  • Rinse thoroughly. And it’s as simple as that: your toilets are now spotless and shine with a thousand lights!

Tired of those limescale stains that get stuck on your iron, but you never manage to get rid of them? We bet that our remedy will make short work of it. It will take a little time, but the result is great! This time, mix 2 teaspoons of baking soda with 1/2 cup of white vinegar and 1/2 cup of water. Then pour this solution directly into the iron tank. Plug it in and program the “steam” function. Leave it like this on the ironing board for about 30 minutes. After this time, you just need to empty the tank and fill it with distilled water instead. Turn the iron on again with the same “steam” program for another 25 minutes. Finally, take an old towel that you no longer use and iron it. Step by step, you will notice that the lime deposits will come off easily. Bet won!