You must have noticed that the tile grout on your floor sometimes remains dirty and black, despite your best efforts. Several times a week you clean the bathroom and kitchen, and yet the dirt inevitably accumulates in these areas. That’s enough to make you wince! But no matter, we tell you how to get rid of these consequences of soap residues, mold and limestone on the grout.

How to clean blackened floor tile grout?

Soap residue, mold, grease, food, limestone … we see green and immature in our bathrooms and kitchens! No wonder that was said. These are two parts that emit a lot of moisture and other inconveniences. Therefore, regular cleaning is necessary. As for the dirty seals in particular, there is nothing insurmountable here! Far from it. Here are the simple steps to clean them in no time: What you need:

  • 2 tablespoons of white vinegar;
  • 1 tablespoon dishwashing liquid ;
  • 2 tablespoons toothpaste;
  • 2 tablespoons of baking soda;
  • The juice of one lemon.

Instructions:

  • Start by mixing the ingredients in a clean bowl. They must be well integrated with each other.
  • Dip a clean sponge in the mixture and then pass it over the joints of the tiles. You can also use a brush for scrubbing.
  • Wait a few minutes (about 10) for the product to work its magic.
  • Rinse abundantly.
  • Wipe the lines with a clean cloth.

If this solution easily removes mold, grease and soap residue, it’s best to keep up the habit! Clean your grout once a week or more to avoid wasting too much time accumulating dirt.

How do you clean dirty floor tile grout without scrubbing?

If you are worried about breaking the seal, there is a way to clean it without scrubbing. The method is based on the cleaning power of baking soda and hydrogen peroxide, which together can clean grout lines without any effort on your part. Place in the stages of realization of your ecological cleaner. What you need:

  • 1/3 cup baking soda
  • 1/4 glass of hydrogen peroxide
  • 1 teaspoon of washing up liquid

Instructions:

  • Mix the ingredients in a bowl
  • Apply the mixture to the joints
  • Leave on for 10 minutes
  • Gently blot or wipe with a clean towel
  • Allow the seals to dry

Yes, the secret to cleaning tile grout without scrubbing it is so simple! With baking soda’s ability to remove stubborn dirt and hydrogen peroxide’s excellent bleach alternative, cleaning your floor is a breeze!

How to clean blackened silicone sealants in the bathroom?

The joints in the bathroom sometimes consist of a sealant that is a real breeding ground for mold! The good news is that even if the cleaning seems difficult, the task is not so difficult. Again, the spotlight is on two undeniable stars of natural cleaning: baking soda and white vinegar.

  • We will first make a kind of paste by mixing 1 cup of baking soda and some water.
  • Dampen a damp cloth with the paste.
  • Rub it over the blackened sealant to cover it sufficiently.
  • Spray the paste with a cup of white vinegar and let it sit for 5 minutes
  • Scrub with a stiff bristle brush
  • Run a damp sponge over the sealant to rinse it off
  • Then dry with a clean cloth.
  • If stains remain, do not hesitate to repeat the process. Patience pays off!

It is also recommended to use hydrogen peroxide to destroy the spores. In this case, spray the bathroom grout generously after using the respective method. In this case, a mixture of 1 part hydrogen peroxide and 4 parts water should be sufficient. Rinse with cold water, dry with a clean towel and you’re done! Also note that this solution is also suitable for shower caulking.

Clean floor grout with white vinegar and lemon

We’ve mentioned baking soda and white vinegar as great natural cleaners, but don’t forget that there’s a third ingredient that’s just as good as these. We’re talking about lemon, of course, and its natural acids, which are perfect for household use! When it comes to tile grout, citrus can work wonders, especially when combined with the two products mentioned above. What you need:

  • 2 glasses of water
  • 1/4 glass of lemon juice
  • 1/2 glass of baking soda

Instructions:

  • Mix all the ingredients well and then pour them into a spray bottle if you want to make a cleaner in spray form
  • Apply the product to the joint lines and leave it on for 15 minutes
  • Then rinse it off with a damp cloth before letting it dry. And that’s all you need to do!

Resistant tracks? Get a used toothbrush and a scrub. You don’t have to make any effort either! All you have to do is lightly brush the area while the dirt comes off.

If you don’t feel like using chemicals, these grandma’s tricks should make you happy when caring for your floors with ingredients we all have at home.