Even for the house fairies, it’s a tedious task. Cleaning toilets is never a breeze, especially when our toilets give off unpleasant odors or accumulate tartar. Fortunately, there are many simple and inexpensive tricks to make your toilet spotless!
Tartar, calcium carbonate, and dirt can get trapped in your toilets and quickly become difficult to remove. Considered a chore by most of us, toilet cleaning isn’t that hard. Provided you know the right tips for immaculate toilets.
How do stains accumulate in the toilet?
It damages the faucets, accumulates in our toilets and leaves white spots on our windows, in short, lime is a real nuisance every day! This sedimentary rock present in the water of our faucets can be very stubborn. If it is harmless to health, hard water has the power to calcify and clog the pipes. Tartar develops, which then becomes problematic because it is difficult to remove. And the longer the problem drags on, the more recalcitrant the traces become. Therefore, it is important to act as soon as possible with appropriate products.
What do you need to clean your toilet properly?
To clean your toilet properly, you don’t need to spend a fortune on industrial products or scrub until you run out of steam. There are many natural tricks to make it sparkling clean. All you need is the right equipment and the use of effective products. Arm yourself with a toilet brush, rubber gloves, a toilet plunger and sandpaper. To get rid of stubborn stains, a few ingredients are preferable. For the most part, they are 100% natural and are sure to be in your cupboards. You will need vinegar, baking soda, a can of Coca-Cola and kerosene oil. If you don’t have kerosene oil, petroleum jelly will do as well.
Now that you are fully equipped, it is important to know the basics of deep cleaning. The first thing you need to do when your toilet is clogged is to lift the seats to clean the sides and rims of your toilet. Start by putting on gloves and pouring in your natural cleaner. Scrub the sides with a toilet brush and the edges with a sponge. Leave on for about thirty minutes, make a final stroke with the toilet brush and flush by flushing the toilet. Normally, all stains will be gone. If tartar marks remain, a little more remover must be used.
If the dirt remains encrusted despite cleaning your toilet, don’t panic! There are effective products to get rid of stubborn stains effortlessly.
1) Vinegar and baking soda
It is the ideal combination to eliminate bacteria and remove limescale residue. Several preparations of toilet cleaners are based on baking soda. For good reason, this organic compound is full of antibacterial, disinfecting and sanitizing properties. Bonus: Baking soda is biodegradable, non-toxic and economical. A boon to the planet and to your wallet. Vinegar is a versatile ingredient for cleaning the whole house. This “miracle” cleaner is prized by natural product lovers and cleans all surfaces and removes encrusted tartar.
2) Coca Cola
If this soft drink is not recommended for your line or for your health, it is still the best ally of your toilets. To use it, nothing easier! Just pour a can of Coke, preferably Zero, into the bowl. This trick is very useful for regular maintenance of your toilets.
3) Sandpaper
If even the mixture of vinegar and baking soda couldn’t overcome the encrusted tartar, it’s time to pull out the deadly weapon! Put on your gloves and bring some very fine sandpaper. It is best to take the grit called 000, it is the finest on the market, which will save you the unpleasant surprise of ending up with scratched toilets. You can use it alone or soaked in a mixture of vinegar and baking soda to enhance its action. Scrub vigorously, without forgetting to scrub the sides and edges of your toilets. Flush the toilet and you’re done. Your toilet should be bright white.
Is bleach effective in removing limescale?
The answer is no. Contrary to popular belief, bleach does not remove limescale. Its whitening effect makes it less noticeable, which makes you think it will be gone. Only the latter continues to accumulate and settle in your toilet. Bleach is an excellent cleaning agent, but to remove limescale, it must be used in addition to descaling products.
Bleach tops the list of most commonly used household products. For good reason, this oxidizing liquid solution is considered an excellent disinfectant and bleach. To clean your toilet and say goodbye to bacteria, pour 200 ml of bleach on the sides of the bowl. Let it sit for a few minutes before flushing the toilet. An effective solution to restore the whiteness of your toilets and disinfect them thoroughly!
What to do to get rid of the smell of urine in the toilet?
Sometimes, even after cleaning and disinfecting your toilet, an unpleasant urine smell remains. If this is your case, there is the solution! Just follow the pre-cleaning steps, disinfect thoroughly before freshening the air with a homemade air freshener. To keep your toilets smelling great, it’s important to clean them regularly for better maintenance.
How to keep your toilet clean longer
After descaling, disinfecting and thoroughly cleaning your toilets, it’s best to keep them clean for as long as possible. To do this, regular maintenance is necessary. Whether it’s your toilets, your faucets, or your pipes, there’s a versatile ingredient that will have your bathroom sparkling in no time: kerosene oil. As mentioned earlier, you can substitute this product with petroleum jelly if you don’t have it. For weekly cleaning, soak a microfiber cloth with kerosene oil. There are also considerable tips for cleaning the tile grout in your bathroom!
