The iron should be cleaned regularly, especially if you use it frequently. Otherwise, you risk staining the clothes you’re ironing with dirt and lime deposits and damaging your device. However, there are a few tricks to clean your iron easily and inexpensively. Find out which ones!

Clean the iron tank to remove calcium deposits

One of these solutions is water and citric acid (one tablespoon of citric acid to half a quart of water). Mix the water with the citric acid in a cup, and then pour the preparation directly into the compartment of the iron intended for water. Then the steam will be activated, and the water will be drained. Remember to use a container to keep it. In this way, each time you use it, you can remove all the dirt that settles inside the iron. Once the inside is clean, the next step is to clean the exterior of the device as well as the soleplate, which we will see.

Clean the soleplate of the iron

The exterior of the iron can be cleaned easily, quickly and cheaply. To clean the soleplate of the iron, take a dishwasher tablet and rub it directly on the area to be treated, insisting on the blackened parts, you will find that they disappear slowly and effortlessly. You can use it on the dry or wet sole. When this process is complete, dry it with a well-wrung microfiber towel and you will find it sparkling clean and like new.

Use distilled water

The main problem caused by dirt deposited in the iron is water. By allowing water to remain in the iron, it not only stagnates, but over time it can damage certain components until the iron itself deteriorates. However, water is necessary for the proper functioning of the iron. Therefore, it is advisable to use distilled water and avoid tap water that contains lime.

Other tips for cleaning the iron

  • Baking soda and candle wax for cleaning the iron

To remove lime stains on the soleplate of the iron, you can use baking soda. Mix baking soda and water in a container until a paste is formed. Then apply with a sponge on the already hot plate and rinse. Finally, wipe with a clean, damp cloth before using again. To prevent clothes from sticking to the iron, you can use a mixture of baking soda and lemon and you’ll have an effective cleaner. Another trick is to rub a candle on the surface of the hot iron and then activate the steam function. Finally, remove the excess wax with a clean cloth.

  • Salt for cleaning the iron

Another option is to use coarse salt. Put several tablespoons of coarse salt on a cloth, turn on the iron and rub it once it is hot. Then wipe it with a clean cloth soaked with a few drops of dishwashing liquid. So, remember that it is important to clean your iron regularly to avoid the accumulation of lime and ensure its proper functioning.